美國Cannon恒溫粘度水浴CT-2000

簡要描述：

9726-A35美國Cannon恒溫粘度水浴CT-2000 Constant Temperature Bath

更新時間：2024-10-06

訪問量：2495

廠商性質：經銷商

生產地址：

在線詢價聯系我們

產品介紹：

9726-A35美國Cannon恒溫粘度水浴CT-2000 Constant Temperature Bath

微處理機控制ct - 2000系列恒溫浴適應粘度計管需要浴深度12”和提供可靠的溫度控制從10°C到150°C。該單元可容納7個同時粘度的測定。

精確和精確的溫度控制

溫度范圍:10°C到150°C

溫度精度:±0.01°C從10°C到100°C;從100°C±0.03°C到100°C

符合ASTM D445溫度敏感性要求的運動粘度測定

電機驅動攪拌器，確保浴溫均勻

微處理器控制的溫度調節和網絡能力

期望的浴溫和校準溫度被數字輸入在面板的鍵盤上

集成微處理器自動調節浴溫

目標和實際浴溫度監控的RTD溫度探測器,不斷顯示在°C或°F在液晶屏幕上

rs - 232和rs - 485通信端口提供數據采集和多單元聯網功能

9726-A35美國Cannon恒溫粘度水浴CT-2000 Constant Temperature Bath

For Kinematic Viscosity from 20 °C to 150 °C
ASTM D445/D446, ISO 3104/3105

The microprocessor-controlled CT-2000 series constant temperature bath accommodates viscometer tubes requiring a bath depth up to 12" and provides reliable temperature control from 10 °C to 150 °C. The unit accommodates up to 7 simultaneous viscosity determinations.

Precise and accurate temperature control

Temperature range: 10 °C to 150 °C*
Temperature accuracy: ± 0.01 °C from 10 °C to 100 °C; ± 0.03 °C from 100 °C to 150 °C
Meets ASTM D445 temperature sensitivity requirements for kinematic viscosity determination
Motor driven stirrer ensures a uniform bath temperature

Microprocessor-controlled temperature regulation & networking capabilities

Desired bath temperature and calibration temperatures are digitally entered on the front panel keypad
Integrated microprocessor automatically regulates bath temperature
Both target and actual bath temperatures are monitored by an RTD temperature probe and continuously displayed in °C or °F on the LCD screen
RS-232 and RS-485 communication ports provide data acquisition and multi-unit networking capabilities

Efficient, user-friendly design

Seven glass viscometer ports (each 2” in diameter) and two thermometer ports (each 0.4” in diameter) allow up to 7 simultaneous viscosity determinations**
Two electric heating elements quickly heat bath media to the selected temperature
Stainless steel baffle provides a plain reflective viewing background
Integrated stainless steel cooling coil allows connection to tap or recirculating water chiller for temperatures slightly above or below ambient. An external thermoelectric bath cooler is also available.
Convenient drawer provides easy access to electrical controls
Capable of using water or oil as bath medium

9726-A35 Constant Temperature Bath

Safe operation

Bath thermistor senses over-temperature fault and removes power
Thermistor disconnection results in removal of bath heater power
Liquid level sensor prevents operation if bath liquid is not at a safe operating level

Reliable performance

Well tested CANNON bath platform offers reliability and dependable support
All wetted components are manufactured from high quality stainless steel or glass
The heavy duty aluminum frame offers a corrosion-resistant epoxy finish

Dimensions (W × D × H)	43.8 cm × 46.4 cm × 58.4 cm (17.3 in × 18.3 in × 23 in)
Weight	51.4 kg (113 lb)
Shipping dimensions (W × D × H)	61 cm × 50.8 cm × 109.2 cm (24 in × 20 in × 43 in)
Shipping weight (with all items)	56.7 kg (125 lb)
Temperature range and accuracy	10 °C to 100 °C, ± 0.01 °C 100 °C to 150 °C ±.03 °C * Test temperatures < 40 °C and high ambient temperature test environments require an optional bath cooler
Sample capacity	7
Bath height	12 in
Bath volume	17 L (4.5 gal)
Operating conditions	15 °C to 30 °C, 10% to 75% relative humidity (non-condensing), Installation Category II; Pollution Degree 2
Electrical specifications	100 - 130 Vac, 50/60 Hz; 200 - 250 Vac, 50/60 Hz; 1400 watts power consumption
Compliance	CE Mark; EMC directive (2004/108/EC); Low voltage directive (2006/95/EC); HI-POT (1900 Vdc, 60 sec.); ROHS
Data output	RS-232 and RS-485